Introduce
Hot Press battery Formation equiment is used for hot pressing of 16-channel single-ended electrode batteries, The machine and equipment adopt a horizontal structure, with a total of 1 set of pressurized structures, each set of 8 laminated sheets, and each layer can use 2 batteries, with a total of 16 channels.
This equipment is mainly used for the hot-pressing formation of pouch cell lithium-ion batteries.
pouch cell hot-press battery formation equipment is used for high-rate forming of pouch cell lithium batteries under heating and pressurization. Tests have proven that NCM, LFP and other material cells can be formed at high-rates at high temperatures. Basic principles of pouch cell battery hot-pressing forming machine This is because the conductive properties of the electrolyte are greatly improved at high temperatures.
more about battery lab reseach equiment video.
(Horizontal hot press) battery formation equipment
Features
- Multi-stage heating pressure formation can be realized, and the temperature and pressure of each stage can be set independently;
- High precision diaphragm type heater, good temperature uniformity, service life Long, temperature can be set;
- Horizontal double station design, multi-channel stacking, flexible use;
- Proportional valve control cylinder drive, precise pressure control;
- Plate integrated positive and negative lug wiring fixture design, good contact stability;
- PLC control, HMI operation, design a variety of safety protection functions.
Main Parameter
- tab width: 10 ~ 40mm;
- Battery size: L:40~180mm; W; 40~180mm;
- tab mode: soft pack battery, single-ended tab;
- Number of channels: 1*8, a total of 16 channels, the number of single-layer 2;
- Pressure direction: horizontal horizontal pressure;
- Working pressure: 300 ~ 2000kg, accuracy: s1000kg:±20kg; > 1000kg:s±2% proportional valve control;
- Hot pressing temperature; Control range: room temperature ~ 90℃;
- Heating speed: 30min from room temperature to 80℃;
- Formation equipment: Standard 5V12A battery tester, can be customized according to customer requirements;
- Charge and discharge indicators: constant current charging, constant voltage charging, constant discharge, etc;
- Air source: 0.25 ~ 0.76Mpa;
- Voltage: single-phase 220V±10%;
- Total power: 3kW;
- Weight: 500kg;
- equipment Size: L1250mm*W900mm*H1800mm
