Products Description
The double planet four-paddle vacuum mixer is an efficient mixing equipment integrating vacuum low-speed mixing and high-speed dispersing. It can be applied to the mixing process of various solvents and powders, such as the batching process of lithium ion batteries, solar energy, rubber tape, chemical and other raw materials.
Technical Parameters
- Stirring mode: revolution + rotation, two stirring shaft +1 dispersing shaft +1 wall scraper (Teflon) “Applicable slurry: medium density Max.2Kg/L, viscosity Max, 600,000 mPa ·s;
- Motor configuration: 2.2KW stirring motor, 1.5KW dispersible motor;
- Material volume: maximum effective volume 5L, designed volume 8L;
- Tank size: inner diameter Ø240mm*H180mm;
- Revolution speed: Max.70rpm;
- Rotation speed: Max.112rpm;
- Dispersing speed; Max,6100rpm, 60mm in diameter of dispersion plate (circular speed Max.19m/s);
- Liquid feeding: DN50;
- Discharge interface: DN25;
- Vacuum system: standard vacuum pump, vacuum degree -98KPa;
- Mixing time: 0~999min can be set;
- Slurry temperature: bucket wall humidity measurement, HMI display, cooling water can be used to reduce humidity
- Sealing material: stand sealing using silicone rubber/fluorine/butadiene rubber;
- The dynamic seal adopts SiC-S+ fluorine rubber
- Mixing spacing: twist oar is 2~3mm from the bottom of the barrel, oar is 2~5mm from the wall of the barrel, and the spacing between the two oar is 3~5mm;
- Standard vacuum pump, vacuum degree -98KPa;
- PLC control, HMI operation;
- Power supply: AC 3×380V±5%,50Hz total power 4.5KW;
- Use environment: recommended ambient temperature 25±3℃, humidity 30~90RH, no vibration and electromagnetic interference;
- Equipment size: length 1460mm x width 600mm x height 1770mm;
- Weight: about 700Kg
Features:
- Four OARS double axis planetary stirring, twist frame stirring paddle with high speed dispersion Plate and scraping wall, no stirring dead Angle;
- Vacuum environment, effectively eliminate the bubble generated in the stirring process, vacuum holding effect is good;
- Low speed mixing through the public, rotation to achieve macro mixing, high speed dispersing disc Micro mixing through shear force;
- Can carry out multi-speed operation, can set the stirring speed and time of each section;
- The effective volume of the mixing tank is 5L, made of high quality SUS304 stainless steel, acid and alkali corrosion resistance;
- Slurry barrel electric lifting design, equipped with spot light, easy to operate, to ensure the safety of vacuum mixing process;
- Jacket type mixing tank design, can pass cooling water, suitable for a variety of process requirements;
- PLC control, HMI operation, easy operation and automation.
